CM-100 VARIABLE SPEED LAB DISPERSER (NON-EXPLOSION PROOF)
| PART DESCRIPTION | PART NUMBER | PRICE EACH | |
| CM-100 without tachometer, includes stand, wound transformer type variable speed controller, shaft and one impeller. 110V only.* | M-10001 |
$2050.00 |
|
| Same as M-10001, except with electronic speed control (non-feedback type) in lieu of variable transformer. 110V operation, without tachometer. | M-10002 | $1,675.00 | |
| CM-100 with programmable controller and digital tachometer (feed-back controller maintains selected speed under load). Includes mix container holder and shaft and one impeller. 110V | M-10003 | $2,495.00 | |
| Ammeter for digital feedback controller machines, attached to controller | M-20021 | $165.00 | |
| Mix container holder. | M-10012 | $140.00 | |
| Spare impeller with ¼” hub, (1” - M-10021, 1.25” - M-10022, 1.5” - M-10023, 2” - M-10024, 2.5” - M-10025). | $105.00 | ||
| Standard Disperser shaft with ¼” pin for hi-shear impellers (no impellers). | M-10032 | $175.00 | |
| CM-100 motor only, with or without encoder |
$595.00 w/o encoder, $725.00 w/encoder |
||
| Jacketed, .5 liter jacketed, stainless steel media mill vessel. | M-10041 | $375.00 | |
| Rotor/Stator Assembly, 1.1” Rotor includes new mixing shaft and adapter piece. | M-164178 | $595.00 | |
| Jacketed, stainless steel mix vessel, (1,2, and 3 liter). | Call Factory | ||
| Counter tension device for effortless raising and lowering of shaft/motor assembly | M-10013 | $155.00 | |
CM-100 LAB MEDIA MILL (NON-EXPLOSION PROOF)
| PART DESCRIPTION | PART NUMBER | PRICE EACH |
| CM-100 with three 1 ¾” discs on stainless steel shaft with programmable feed-back controller with digital tachometer and vessel holder. (Batch type milling only.) Price includes vessel M-10041 | M-10005 | $2,795.00 |
| Media mill shaft with 3 discs | M-10033 | $295.00 |
*220 Volt operation required 1.5 KVA Transformer (supplied upon request at extra charge).Notes: *The CM-100 Media Mill can be converted to the CM-100 Disperser by addition of shaft M-10032 and Hi-Shear Impeller
D.H. Melton Co., Inc. has a policy of continuous research and product development. Therefore, prices, dimensions, and specifications are subject to change without notice.The CM-100 (M-10002) with variac or electronic transformer speed control will not hold constant speed as the load on the motor changes. If the mix viscosity increases, speed will decrease and vice-versa. Manual readjustment is necessary. The CM-100 with feedback control (M-10003, M-10004, M-10005) senses RPM change and will automatically adjust the voltage to keep the machine running at the programmable speed.The IBM PC Compatible controller option allows customer to program different speed steps to run at different times, up to 10 hours and automatically shutoff when desired. The menu-driven software is very easy to use.
The media mill attachment can be used with the standard CM-100 (M-10001 and M-10002) if mix container holder is used, but constant speed is not guaranteed.
The jacketed .5 liter mix vessel is recommended for use with the media mill attachment for temperature control and correct vessel/disc geometry.
The media mill system is a batch type system for lab evaluation of media size, media density and product residence time on approximately 100-200 ml batches to help evaluate the optimum parameters for production mills. This can help eliminate much guesswork involved with large production mills.
The counter tension device counteracts the 13 lb. Weight of the motor and shaft, allowing the operator to raise and lower the motor with approximately 5 lbs. of force instead of 13 lbs.